OSHA Proposes Rule to Ensure Crane Operators Are Qualified To Safely Operate Equipment

WASHINGTON, DC – The U.S. Department of Labor’s Occupational Safety and Health Administration today announced a proposed rule to increase the safety of America’s construction sites. In addition to providing long-term clarity regarding crane operator certification requirements, the proposal reinstates the employer duty to ensure that a crane operator is qualified to safely operate equipment.  

Under the proposed rule, a change to the categories of certifications for crane operators would ensure more operators are able to meet the requirement. The proposal discontinues a 2010 requirement, which never went into effect, that crane operator certification must include the crane lifting capacity for which the operator is certified. The proposal would expand the type of certification programs for crane operators.

Comments on the proposed rule may be submitted electronically at http://www.regulations.gov, the Federal e-Rulemaking Portal, or by facsimile or mail. See the Federal Register notice for submission details. Comments must be submitted by June 20, 2018.

OSHA recently published a final rule extending the operator certification compliance date until November 10, 2018, in order to provide the agency with additional time to complete this rulemaking to address stakeholder concerns related to the Cranes and Derricks in Construction standard.

Under the Occupational Safety and Health Act of 1970, employers are responsible for providing safe and healthful workplaces for their employees. OSHA’s role is to ensure these conditions for America’s working men and women by setting and enforcing standards, and providing training, education and assistance. For more information, visit www.osha.gov.

Mountain States Upgrade Schedule

Stan Dupree Training Center

3235 Baldy Drive
Helena, MT 59601

May 12, 2018 - First Aid/CPR - 8:00 A.M.

June 1, 2018 - J/L upgrade - 1:00 P.M.

August 3, 2018 - J/L upgrade - 1:00 P.M.

August 11, 2018 - First Aid/CPR - 8:00 A.M.

October 5, 2018 - J/L upgrade - 1:00 P.M.

November 3, 2018 - First Aid/CPR - 8:00 A.M.

December 1^st & 2^nd, 2018 - OSHA ET&D - 8:00 A.M. TBD

December 7, 2018 - J/L upgrade - 1:00 P.M.

NCCCO